V4.526 notes

Home ] What's new! ] Suspension types ] Tutorials ] Downloads ] Data files ] FAQ ] Purchase here ] Contact us ]

SusProg3D - Suspension by Design.
===================
Version 4.526 has a number of enhancements.

Thanks to all of those who made comments and suggestions.

In no particular order.

bullet

Updated some of the A-arm descriptions. This added "Top" and "Bottom" to the appropriate A-arm description.

bullet

Reviewed and updated the help file with axis descriptions. Some of the diagrams used X, Y and Z notation for the lateral, vertical and longitudinal axis, which may have been confusing to those who used a different axis naming convention.

bullet

Fixed a bug in Sawdust that prevented any further registration if a registration failure occurred.
If a failure occurred when registering Sawdust, all subsequent registrations would fail, even if the registration data was valid.
Thanks to Simon for this one.

bullet

Fixed the bug in the ride height calculations.
When using a three point ride height specification, the resultant vehicle coordinate calculations were slightly different depending on whether the 2 points were at the front or the rear, even if the chassis orientation would have been otherwise identical.
This has also resulted in a more efficient calculation.
Thanks to Oliver for this one.

bullet

Added an option to the Calc2Excel export to use chassis datum coordinates.
Previously, most coordinates exported to Excel were vehicle (or ground) based coordinates.
An option has been added to enable the export of chassis based coordinates.
Thanks to Frederico for this one.

bullet

Windows 10 is now correctly identified in the About box.

V4.526C (Build 1034.2) enhancements and bug fixes.

bullet

Updated the Input2Excel dialog with logging option and can now export both ends of the vehicle.

bullet

Added a warning message when opening a data file that had previously been saved with a registered version, when using an Evaluation version.

bullet

Added a logging option for helping to diagnose registration problems.

V4.526D (Build 1037.3) enhancements and bug fixes.

bullet

Added back the A-arm base and normal lengths.
Thanks to Adam for this one.

V4.526E (Build 1037.4) enhancements and bug fixes.

bullet

Fixed up the A-arm calculations for struts.
Thanks to Bernd for this one.

V4.526F (Build 1044.5) enhancements and bug fixes.

bullet

Fixed up the display when using custom text sizes.
Thanks to Ruben for this one.

bullet

Added the XLSX suffix for the Excel open dialog.

Your feedback and suggestions are always appreciated.